For Better Performance Please Use Chrome or Firefox Web Browser

Publications

Journal Papers:

48 – A. Fadaei Tehrani, J.Atkinson; A Comprehensive Study of Overcut in Electrochemical Grinding, Journal of Engineering Manufacture, Proceedings of the IMECHE, Part B, 2000.

49 - A. Fadaei Tehrani., E. Imanian,; A New Etchant for the Chemical Machining of St304, Journal of Materials Processing Technology, 2004.

50 - A. Fadaei Tehrani, A. Doosthoseini, et al.; A new odometry system to reduce asymmetric errors for omni-directional mobile robots, Lecture Notes in Computer Science- lecture notes in artificial intelligence, pp600-610, vol3020, 2004.

51- A. Fadaei Tehrani, R. Rojas, et al.; Analysis by synthesis, a novel method in mobile robot self – localization, Lecture Notes in Computer Science- Lecture notes in artificial intelligence, vol3276, pp586-593, 2005.

52 - E. Azimi., M. Ghobadi., E. Tarkesh., M. Keshmiri., A. Fadaei Tehrani., Three Dimensional Smooth Trajectory Planning Using Realistic Simulation , Lecture Notes in Computer Science, Vol. 3276, 2005.

53 - A. Jafari., M. Safavi., A. Fadaei Tehrani.,;  A Genetic Algorithm for Optimization in Conceptual Design Phase of Robots , Sensors & Transducers  Journal , ISSN 1726-5479, 2006 .

54- H. Zarepour, A. Fadaei Tehrani ; Statistical Analysis on Electrode Wear in EDM of Tool Steel DIN 1.2714 Used in Forging Dies, Journal of Materials Processing Technology, pp 187-188, 711-714, 2007

55 -A. Mohamadi, - A. Fadaei Tehrani, et al; Statistical analysis of wire electrical discharge turning on material removal rate, Journal of Materials Processing Technology, pp283-289, vol205,2008.

56- A. Mohammadi., A. Fadaei Tehrani., E. Emanian., D. Karimi.,; A New Approach to Surface Roughness and Roundness Improvement in Wire Turning Based on Statistical Analysis, Int. Journal of Advanced Manufacturing Technology, vol37, pp64-73 , 2008.

57- A. Fadaei Tehrani , M. Haddad.; Investigation of Cylindrical WEDT of AISID3 Tool Steel Based on Statistical Analysis, Journal of Material Processing Technology, pp77-85, vol. 198, 2008.

58- A. Fadaei Tehrani , M. Haddad.; Material Removal Rate Study on CWEDT       Process, Journal of Material Processing Technology, pp369-378, vol. 198, 2008.

59- M.J Hadad, M.Tajik, A. Fadaei Tehrani, et all;  An experimental investigation of cylindrical wire electrical discharge turning process using Taguchi approach, International Journal of Material Forming, pp167-179,vol2, 2009.

60-  M.J Hadad, A. Fadaei Tehrani, et al.; An experimental investigation of cylindrical wire electrical discharge turning process; International Journal of Advanced Manufacturing Technology, Vol 9-12, 2010.

61- S.Mir andani, M. Safavi, A. Fadaei Tehrani, M. Salimi, M. Farzin ; Imporoving the Quality of Surface in Polishing Process with the Magnetic Abresive Powder Polishing (MAPP) by use of Ultrasonic Oscillation of Workpiece on a CNC Table, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING , vol. 12 -284, pp 275-284, 2011.

62- S. Mirianandani, M. Safavi, A. Fadaei Tehrani, M. Salimi, M. Farzin ; "Imporoving the polishing process with the magnetic abrasive powder polishing using a high-ferequency induction heating source on CNC table"; INTERNATIONAL JOURNAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, PP 601-610, Vol 55, 2011.

63-M.Rasoli, A.Abdollah, M.Farzin, A.Fadaei Tehrani, A.Taherzadeh; Influence of ultrasonic vibration on tube spinning process, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, PP1443-1452, Vol.212, 2012.

64-H.Karvan, M.Farzin, A. Fadaei Tehrani ; Manufacture of bulge Test Apparatus Suitable for Micro-sheet metal Forming, JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL; PP 1213-1216, Vol 9,  2010.

65-MJ.Hadad, M.Tajik, A.Fadaei Tehrani, A.Mohamadi, M.Hadi; An experimental investigation of cylindrical wire electrical discharge turning process using Taguchi approach; International Journal of Material forming, pp 167-179, Vol 2, 2009.

109- H. Montazeralghaem, M. Badrosamay, A. Fadaei Tehrani " Investigation of vibration assisted friction stir Welding"; KEY Engineering Materials, pp741-746, Vol.504-506, 2012.

67- M. Givi, A. Fadaei Tehrani, A. Mohammadi; "Polishing of the aluminum sheets with magnetic abrasive finishing method", Int Journal of Adv. Manufacturing Technology, pp 989-998, vol. 61, issue 9-12, , Aug. 2012.

68- S.Khalaj Amineh, A.Fadaei Tehrani, A.Mohamadi, E.Saeedi "Improving the surface quality using combined ultrasonic vibration and magnetic abrasive finishing method "; Int. Journal of Adv. Manufacturing Technology, pp 1-11, August 2012.

 

 

 

Conference papers:

67- A. Fadaei Tehrani ,  J. Atkinson.; A Study Of Pulsed Electrochemical Machining, 11th  International Symposium of  Electro-machining, 1995, Swiss.

68- A.Fadaei Tehrani.,J. Atkinson; Surface Finish in ECG and PECG, International Symposium of Electro-Machining, 2001, Spain.

69- A.Fadaei Tehrani, A.M. Doosthoseini,et al.; A New Odometry System to Reduce Asymmetric Errors for Omni-directional Mobile Robot, The 2nd Int. Conf. on Mechatronics, 2003, South Korea.

70 - M. Keshmiri., A. Fadaei.,et al.; Three Dimensional Smooth Trajectory Planning Using Realistic  Simulation for a Humanoid Robot, Robocup International Symposium 2004, 4-6  July 2004, Portugal .                 

71 - A. Fadaei., Tehrani, R. Rojas,et al.; Analysis By Synthesis; A Novel Method in Mobile Robot ;  Self-Localization, Robocup International Symposium 2004, 4-6 July 2004 Portugal

72 - A. Fadaei Tehrani., E. Tarkesh; Pre-Controlling the Semi Passive Bi-Pad Robot Using Realistic Simulation and Genetics Algorithm, The 15th International Symposium on Measurement and Control in Robotics, 8-10 Nov. 2005, Belgium.

73 - A. Shojaey, H. Sepehri, M. Zadshakoyan; A. Fadaie Tehrani; Estimate Machining Force Along Tool Life by Using Artificial Neural Network (ANN), Tehran International Conference of Manufacturing Engineering, Iran, 2005.

67 - A. Fadaei Tehrani.,  A. Mohammadi, et al.; A New Approach in Turning With WEDM to Evaluate the Effect of machining process, The First Int. Conf. of Manufacturing, 2006, Tehran, Iran . 

74 - H. Zarepour, A. Fadaei Tehrani, D. Karimi, S. Amini ; Statistical Analysis on Electrode Wear in EDM of Tool Steel DIN 1.2714 Used in Forging Dies, The International Conference on Advances in Materials and Processing Technologies, Lasvegas, USA, 2006.

75- H. Zarepour, A. Fadaei Tehrani ; Statistical Analysis on Electrode Wear in EDM of Tool Steel DIN 1.2714 Used in Forging Dies, The Third International Conference on Advanced Forming and Die Manufacturing Technology ( AFDM 2006, South Korea, 2006.

76 - H. Zarepour., A. Fadaei Tehrani., D. Karimi., S. Amini., ; Modeling of Electrode Wear and Optimization of the Process Parameters in EDM of DIN 1.2714 Steel, AFDM2006, Busan Korea, Sep 4-6, 2006.          

77 - A. Fadaei Tehrani., S. Zarepoor., M. Karimi; An Experimental Investigation on Electrode Discharge Machining of DIN 1.2714 Steel, The 10th International Conf. of. Mechanical Engineering 2006, Isfahan, Iran .          

78 - A. Fadaei Tehrani.,A.Mohamadi.; Investigation on Surface Roughness of Wire EDM  Turning Parts by Statistical Analysis, Int. Conf. on Advanced in Materials and Processing Technologies (AMPT 2006), July30-August3, Las Vegas, USA .                                  

79 - A. Mohamadi., A. Fadaei Tehrani., A New Approach in Surface Roughness and Roundness Improvement in Wire Electrical Discharge Turning Based on Statistical Analysis, ASME Int. Conf. on Manufacturing Science & Engineering, October 8-11, 2006, Michigan, USA.       

80 - M.J Hadad, A. Fadaei Tehrani, et al.; Experimental Study of Cylindrical Wire Electrical Discharge Turning (CWEDT) Process, Part 1: MRR, 2nd Tehran international congress on manufacturing engineering (TICME 2007), Tehran-Iran, 2007.

81 - M.J Hadad, A. Fadaei Tehrani, et al.; Experimental Study of Cylindrical Wire Electrical Discharge Turning (CWEDT) Process, Part 2: Ra & Roundness, 2nd Tehran international congress on manufacturing engineering (TICME 2007), Tehran-Iran, 2007.

82- A. Fadaei Tehrani, H. Mohamadi, et al.; Experimental investigation of different parameters influence on material removal rate in conical Wire EDM, 2nd Tehran international congress on manufacturing engineering (TICME 2007), Tehran, Iran, 2007.

83 - M.J. Haddad, A. Fadaei Tehrani , A. Mohammadi; Application of Taguchi Method The Optimization of MRR, Ra and  Roughness of CWEDT; 15th Int. Conf. on Mechanical Engineering-ISME 2007, 15-17 May 2007, Tehran, IRAN.

84 - A. Fadaei Tehrani., S. Ali., J. Atkinson; Residual Stresses Resulting from Pulsed Electrochemical Grinding, Proceeding of the 20th Int. Conf. on Computer Aided Producing Engineering, ISBN-13 978-14-4/I, pp 142-151, 2007

85- A. Farhadi., A.F, Tehrani., M. J. Haddad.,  A. A..Mohammadi.,; Effects of Machining Parameters on Cutting Force and Surface Roughness of the Super Alloy Inconel 738, 2nd Tehran International Congress on Manufacturing Engineering, Dec 10-13, 2007.

86- A. Fadaei Tehrani., H. Mohammadi., A. Z. Hamedani and A. Mohammadi.; Experimental Investigation of Different Parameters Influence on Material Removal Rate in Conical Wire EDM, Tehran International Congress on Manufacturing Engineering, Dec 10-13, 2007.

87- A. Jafari , M. Safavi , A. Fadaei Tehrani ; A Genetic Algorithm to Optimum     Dynamic Performance of Industrial Robots in the Conceptual Design Phase, 10th Edition of the IEEE Conf on Rehabilitation Robotics, (ICORR 2007), USA.  

105 - M. Hadad, A. Fadaei Tehrani, A. Mohamadi, F. Ali Hoseeini , M. Sadeghi "A Study on Surface Roughness, Roundness and Material Removal Rate in Cylindrical wire Electrical Discharge Turning (CWEDT ) based on statistical analysis"; 4the International conference an exhibition on design and production of machine dies/molds, June21-23, 2007, Turkey.

89- F.Azimifar, A. Fadaei Tehrani, S. MirianDesign and manufacturing of 3D laser scanner (single point), The  9th Iranian conference on manufacturing Engineering, Birjand,Iran,1387.

90- M.J Hadad, A. Fadaei Tehrani, A.Mohamadi; A Taguchi Approach And Experimental Investigation Into The Optimal Processing Conditions For The Cylindrical Wire Electrical Discharge Turning Process, The International Conference on Advances in Materials and Processing Technologies ( AMPT 2008 ), 2008.

91- H. Mohamadi, , A. Fadaei Tehrani,et al.; Investigation of material removal rate of aisi D3 tool steel in cylindrical wire EDM (cwedm), The International Conference on Advances in Materials and Processing Technology, Bahrein, 2008.

92- M.J Hadad, A. Fadaei Tehrani, A. Mohamadi; Statistical Analysis Of The Influence Of EDM Parameters On Surface Roughness And Roundness In Cylindrical Wire Electrical Discharge Turning Process, The International Conference on Advances in Materials and Processing Technologies ( AMPT 2008 ),Bahrain. 2008.

94- H. Montazerolghaem., M. Farzin., A. Fadaei Tehrani.,; Theoretical and Experimental Investigation of Viscous Pressure Forming for Manufacture of Miniature Parts, the 9th International Conference on Technology of Plasticity, ICTP2008.

95- H. Mohammadi., A. Fadaei Tehrani., A. Mohammadi., A. Z. Hamadani.,; Investigation of Material Removal Rate of AISI D3 Tool Steel In Cylindrical Wire EDM (CWEDM), AMPT2008, USA, 2008.

96- H. Montazerolghaem., M. Farzin., A. Fadaei Tehrani.,; Investigation of viscous-pressure forming with Finite element simulation and Experimental evaluation for manufacture of miniature parts, The 9th International Conference on Technology of Plasticity, PS-41, 2008.

97- H. Montazerolghaem., M. Farzin., A. Fadaei Tehrani.,; Manufacture of miniature parts using micro electro hydraulic forming of thin aluminum sheets, The 9th International Conference on Technology of Plasticity, ICTP 2008.

 

106- H. Mohamadi, A. Fadaei Tehrani, A.Zinal Hamedani: "Experimental investigation of surface roughness in cylindrical wire electro diccharge machining"; The 2008 International Manufacturing Science and Engineering Conference; Evanston, USA, 2008

 

98-P. Foodeh, A. Poorsina, A. Fadaei Tehrani; A Parametric Study on a HOT Radial Forging Force, The 12th International Esaform Conference on Material Forming, Korea, 2009.

99- A. R. Fadaei Tehrani, H. Mohammadi and K. Torkzade.,; Evaluation of Roughness and Material Removal Rate in CWEDM Using DOE and ANN, Iranian Conference on Manufacturing  Engineering ICME2009, March 3-5, Birjand, Iran,2009.

100- M.Safavi, S. Mirian, A. Fadaei Tehrani, M. Farzin; Incremental Sheet Metal Forming of Variable Thickness Sheet Metals and Comparison with Another by a Flat Ended and a Round Ended Tool, Flexible Automation and Intelligent Manufacturing Conf. ( FAIM2010 ), Ca, USA, 2010,

101- H. Mohamadi, A. Fadaei Tehrani, et al; Experimental investigation of surface roughness in cylindrical wire electro discharge machining, The 2008 International Manufacturing Science and Engineering Conference, USA, 2010.

102- Mehrdad Givi, A. Fadaei Tehrani, A. Mohammadi; “ Statistical Analysis of Magnetic Abrasive Finishing (MAF) on Surface Roughness”, 10th International Conference on Numerical Methods in Industrial Forming Processes, (NUMIFORM 2010), South Korea, 2010.

103- F. Bayat, A, Fadaei Tehrani, D.Mohamadi: "Static and Dynamic Simulation of a Proportional control valve Using ANSYS/emag", Proceedings of the 2011 IEEE Int. Conf. on Mechatronics, Apr 13-15, 2011, Istanbul, Turkey.

109- H. Montazeralghaem, M. Badrosamay, A. Fadaei Tehrani " Investigation of vibration assisted friction stir Welding and composition with conventional friction stir welding"; 3rd Int and 12th National Conference on Manufacturing Engineering  (ICME 2011), Tehran, Iran.

110 - H. Zarepour, A. Fadaei Tehrani, D.Karimi, S.Amini "Statistical analysis on surface roughness in EDM process of tool steel  1.2714 used in forging dies" ;The International Conference on Advances in Materials and Processing Technologies ;

113- S. Khalaj Amineh, E. Saeedi, A. Fadaei Tehrani "Improving the Inner Surface of Cylindrical Specimens with Spiral Grooves Using Magnetic Abrasive Finishing"; Int. Conf. on Mechanical Engineering and Advanced Technology, ICMEAT2012, Isfahan,Iran.

114- S. Khalaj Amineh, A. Fadaei Tehrani, A. Mohammadi; "Analysis of Magnetic Abrasive Finishing on Wire Electrical discharge Machined Surface Roughness"; 3rd International Conference on Manufacturing Engineering ICEME2011, Tehran. Iran.

115- S. Khlaj Amineh, A. Fadaei Tehrani, A. Mohammadi, E. Saeedi "Improving the surface quality using combined ultrasonic vibration and magnetic abrasive finishing method"; 21st Annual International Conference on Mechanical Engineering-ISME2013, 7-9 May,2013, Tehran.Iran.

116-H. Paktinat, A. Barani, A. Fadaei Tehrani, S. Amini; "Rotary Vibration Drilling tool for vibration drilling Process"; 3rd International Conference on Manufacturing Engineering ICME2011, Tehran, Iran.